micRo-Kit and m3-Kit Parts List
- Hardware:
- 4x shaft couplings
- 7x shaft collars
- 7x thrust bearings
- 2x 1.5" roll pins
- Fasteners:
- 12x 25mm M3 bolts
- 4x 40mm M3 bolts
- 16x M3 washers
- 2x #14 5/8" plastite screws
- 10x 1 1/4" screws
- 10x washers
- 1x 2" 10-32 bolt
- 1x 10-32 square nut
- Additional fasteners and hardware (included in blocks):
- 21x 8-32 set screws (some optional)
- 2x 10-32 set screws
- 8x 5/16-18 set screws
- 2x 45mm M3 bolts
- 2x M3 washers
- 2x M3 insert-nuts
- Blocks:
- 2x X motor mount blocks
- 2x X screw receiver blocks
- 1x Gantry motor mount block
- 1x Gantry screw receiver block
- 1x Y block
- 1x Z bottom way holder block
- 1x Z top way holder block
- 1x Z motor mount block
- 1x Toolholder block
- Linear Motion:
- 2x X-axis leadscrews
- 2x X-axis linear ways
- 1x Y-axis leadscrew
- 2x Y-axis linear ways
- 1x Z-axis leadscrew
- 2x Z-axis linear ways
- Electro-mechanical:
- 4x nema-17 stepper motors
- Amp kit (sold separately):
- 1x 4-axis driver board
- 1x amp power supply
- Wiring kit (sold separately):
- 4x home switches
- 4x panel-mount male 6-pin circular DIN jacks with leads
- 4x female 6-pin circular DIN plugs with leads